Viewing Disk Lun Rekeying Details - Brocade Communications Systems WFT-2D User Manual

20
Rekeying all disk LUNs manually
.
FIGURE 405

Viewing disk LUN rekeying details

You can view details related to the rekeying of a selected target disk LUN from the LUN Re-keying
Details dialog box.
1. Select Configure > Encryption from the menu task bar to display the Encryption Center
2. Select a group, switch, or engine from the Encryption Center Devices table, then select
3. Select a Target storage device, then select Group/Switch/Engine > Disk LUNs.
FIGURE 406
858
Pending manual rekey operations
dialog box. (Refer to Figure 266
Group/Switch/Engine > Targets, or right-click the group, switch, or engine and select Targets.
NOTE
You can also select a group, switch, or engine from the Encryption Center Devices table, then
click the Targets icon.
The Encryption Targets dialog box displays.
The Encryption Target Disk LUNs dialog box displays. (Refer to
empty. You must add LUNs manually.
Encryption Target Disk LUNs dialog box
on page 694.)
Brocade Network Advisor SAN User Manual
Figure 406.) Initially the list is
53-1003154-01