Importing A New Mib Into The Management Application - Brocade Communications Systems WFT-2D User Manual

Importing a new MIB into the Management application

The SNMP traps that the Management application receives must be registered in the Management
application in order for these traps to be available. To register a trap, you must first identify the MIB
file that contains the trap information in the mibs_to_compile.txt file. Then, you must register the
traps using the Event Reception dialog box.
To add the MIB file that contains the trap you want to register to mibs_to_compile.txt, complete the
following steps.
1. Go to <install-dir>\conf\mibs\ (Windows) or <install-dir>/conf/mibs/ (UNIX) directory and copy
2. In the <install-dir>\conf\mibs\ (Windows) or <install-dir>/conf/mibs/ (UNIX) directory, search
3. Using a text editor, open the mibs_to_compile.txt file and add the MIB information to the
4. Save the file.
5. If you make changes to the MIB file, open the mibs_to_compile.txt file and save the file.
Brocade Network Advisor SAN User Manual
53-1003154-01
the MIB file into that directory. You may want to copy the MIB into a subdirectory of that
directory.
for the mibs_to_compile.txt file.
document.
When adding the MIB information, be aware of the following rules:
•
MIBs are compiled in the order that they are listed in the mibs_to_compile.txt file.
•
You can add composite MIB files (more than one MIB in a single file).
•
MIB file names in the mibs_to_compile.txt file are case-sensitive. Make sure the case of
the file name you enter matches the case of the actual MIB file. Also, be sure to enter the
complete path of the MIB file, or the portion relative to the mibs directory.
The following is an example of how to add the two Cisco MIB files.
#
# Cisco Mibs
#
CISCO-SMI.mib
CISCO-CONFIG-COPY-MIB.mib
#
# End Cisco Mibs
#
The Management application recompiles all the MIB files. If compilation is successful, the
traps can now be registered in the Event Reception dialog box.
NOTE
If there are compilation errors, you can view the errors in the server log:
<install dir>\logs\server\server.log (Windows) or <install dir>/logs/server/server.log (UNIX).
The Management application recompiles the MIB files and reloads the changes.
32
SNMP traps
1271