Deleting A Layer 2 Acl Configuration From The Application; Deleting A Layer 2 Acl Configuration From The Switch - Brocade Communications Systems WFT-2D User Manual

Deleting a Layer 2 ACL configuration from the application

To delete a Layer 2 ACL configuration from the application, complete the following steps.
1. Select the device and select Configure > Security > Layer 2 ACL > Product.
2. Select the Layer 2 ACL you want to delete in the ACLs list and click Delete.
3. Click Yes on the confirmation message.
4. Click OK on the Device_Name - Layer 2 ACL Configuration dialog box.

Deleting a Layer 2 ACL configuration from the switch

To delete a Layer 2 ACL configuration from the switch, complete the following steps.
1. Select the device and select Configure > Security > Layer 2 ACL > Product.
2. Select the Incremental option as the configuration type.
3. Select Delete from the Operation list for the Layer 2 ACL configuration you want to delete.
4. Click OK on the Device_Name - Layer 2 ACL Configuration dialog box.
Brocade Network Advisor SAN User Manual
53-1003154-01
The Device_Name - Layer 2 ACL Configuration dialog box displays.
This deletes the Layer 2 ACL configuration from the application.
NOTE
The Layer 2 ACL configuration is not deleted from the switch until you deploy the configuration
to the switch.
The Deploy to Products - Layer 2 ACL dialog box displays. To save the configuration, refer to
"Saving a security configuration deployment"
The Device_Name - Layer 2 ACL Configuration dialog box displays.
NOTE
The Layer 2 ACL configuration is not deleted from the switch until you deploy the configuration
to the switch.
The Deploy to Products - Layer 2 ACL dialog box displays. To save the configuration, refer to
"Saving a security configuration deployment"
Layer 2 access control list management
on page 664
on page 664.
17
661