Brocade Communications Systems WFT-2D User Manual page 707

11. Click OK on the Device_Name - Layer 2 ACL Configuration dialog box.
Editing a standard Layer 2 ACL configuration (Fabric OS)
To create a standard Layer 2 ACL configuration on a Fabric OS device, complete the following steps.
1. Select the device and select Configure > Security > Layer 2 ACL > Product.
2. Select the ACL you want to edit in the ACLs list and click Edit.
3. To edit an existing ACL rule, complete the following steps.
4. To add a new ACL rule, complete
5. To delete an existing ACL rule, select the rule you want to edit in the ACL Entries list and click
6. Click OK on the Edit - Layer 2 ACL Configuration dialog box.
7.
Copying a standard Layer 2 ACL configuration (Fabric OS)
To copy a standard Layer 2 ACL configuration on a Fabric OS device, complete the following steps.
1. Select the device and select Configure > Security > Layer 2 ACL > Product.
2. Select the ACL you want to duplicate in the ACLs list and click Duplicate.
3. Enter a new name for the ACL in the Name field.
Brocade Network Advisor SAN User Manual
53-1003154-01
The Deploy to Products - Layer 2 ACL dialog box displays. To save the configuration, refer to
"Saving a security configuration deployment"
The Device_Name - Layer 2 ACL Configuration dialog box displays.
The Configuration_Name Edit Standard Layer 2 ACL Configuration dialog box displays.
a. Select the rule you want to edit in the ACL Entries list and click the left arrow button.
b. Complete step 5 through
OS)" on page 654.
The updated ACL entry displays in the ACL Entries list. To edit additional ACL entries,
repeat step 3.
configuration (Fabric OS)"
The new ACL entry displays in the ACL Entries list. To add additional ACL entries, repeat
the left arrow button.
The updated ACL configuration displays in the ACLs list. To edit additional ACLs, repeat
through step 4.
Click OK on the Device_Name - Layer 2 ACL Configuration dialog box.
The Deploy to Products - Layer 2 ACL dialog box displays. To save the configuration, refer to
"Saving a security configuration deployment"
The Device_Name - Layer 2 ACL Configuration dialog box displays.
The Duplicate - Layer 2 ACL Configuration dialog box displays with the default name 'Copy of
Original_Name'.
Layer 2 access control list management
on page 664
step 9 in "Creating a standard Layer 2 ACL configuration (Fabric
step 4 through step 9
on page 654.
on page 664
in "Creating a standard Layer 2 ACL
17
step 4.
step 2
655