Adding A Pseudo Event On The Resolving Policy - Brocade Communications Systems WFT-2D User Manual

32
Pseudo events
14. Add additional e-mail recipient addresses in the Other Recipients field. Separate multiple
15. If you want the e-mail message for the alert to display a description on the subject line, enter
16. If you want a prologue to be inserted at the beginning of the e-mail message, enter up to 255
17. If you want an epilogue to be placed at the end of the e-mail message, enter up to 255
18. Click Next to advance to the Summary pane.
19. Click Finish.
For more information about adding an event action, refer to
page 1280.

Adding a pseudo event on the resolving policy

When a down event occurs, a resolving policy waits for a specified duration to see if the event
remains in that state by checking if an up event occurs. If an up event occurs, a resolving pseudo
event is generated by the Event Processor.
The following two-part procedure uses both the Add Pseudo Events dialog box and the Add Event
Actions dialog box to create an event action with the resolving policy.
To add a pseudo event definition to the resolving policy, complete the following steps.
1. Select Monitor > Event Processing > Pseudo Events.
2. Click Add.
3. Enter a name for the pseudo event, and select the Enabled check box to enable the event.
4. Click Next.
5. Click the Resolve button, and then enter the duration of time the Event Processor will wait
6. Click Next.
7.
8. Select a remediation event, such as LinkUp, and click the right arrow button to move it to the
1302
e-mail addresses with a semicolon.
the text in the Subject Line field.
characters in the Body Prologue field. The event action message follows the prologue.
characters in the Body Epilogue field.
NOTE
The prologue, the event action message, and the epilogue form the body of the e-mail alert.
The Summary pane of the Add Event Action dialog box displays an overview of the e-mail
configuration you are creating.
The Pseudo Events dialog box displays.
The Identification pane of the Add Pseudo Event dialog box displays.
The Policy pane of the Add Pseudo Event dialog box displays.
before generating the pseudo event. Specify the resolve time in minutes or seconds.
The Events pane of the Add Pseudo Event Events dialog box displays.
Select a critical event, such as LinkDown, and click the right arrow button to move it to the
Selected Down Trap list.
Selected Up Trap list.
"Event action definitions"
Brocade Network Advisor SAN User Manual
on
53-1003154-01