Table; Assigning Roles And Aors To An Ad Group; Removing Roles And Aors From An Ad Group - Brocade Communications Systems WFT-2D User Manual

4. Select NmAors in the Attributes list and click Edit.
5. Enter the areas of responsibility (such as, All Fabricsand All Hosts) in the Value field and click
6. Select NmRoles in the Attributes list and click Edit.
7.
8. Close the ADSI Edit dialog box.

Assigning roles and AORs to an AD group

Using Authentication Server Groups, you assign users to groups within the Authentication Server
Groups server, and assign roles and AORs to the groups within the Management application.
To assign roles and AORs to an AD group, complete the following steps.
1. Select Server > Users.
2. Click the Authentication Server Groups tab.
3. Select the roles and AORs you want to assign to the AD group in the Available Roles / AORs
4. Select the AD group to which you want to assign the selected roles and AORs in the Active
5. Click the right arrow button.
6. Click Apply to save your work

Removing roles and AORs from an AD group

To remove roles and AORs from an AD group, complete the following steps.
1. Select Server > Users.
2. Click the Authentication Server Groups tab.
Brocade Network Advisor SAN User Manual
53-1003154-01
The String Attribute Editor dialog box displays.
OK..
Enter the Management application user roles (such as Host Administrator, Network
Administrator, Operator, Report User Group, SAN System Administrator, Security Administrator,
Security Officer, and Zone Administrator) in the Value field and click OK.
The Users dialog box displays.

table.

Select multiple roles and AORs by holding down the CTRL key and clicking more than one role
and AOR.
Directory Groups table.
If the AD group you want does not display in the table, refer to
page 452.
The selected roles and AORs are moved to the Active Directory Groups table.
When you assign roles and AORs to an AD group and save the configurations, when you reopen
the Users dialog box and select the Authentication Server Groups tab, only the configured AD
group is available.
The Users dialog box displays.
LDAP server configuration
"Loading an AD group"
11
on
451