Brocade Communications Systems WFT-2D User Manual page 1196

29
Flow Monitor
22. Select OK to save the definition.
Selecting the target switch from a list of Fabric Vision-capable switches
To change target switch for the flow definition, complete the following steps.
1. Click the ellipses button to the right of the Target Switch field.
2. Select the Expand All check box to expand the Group/Product tree to show all Fabric
3. Select a switch in the Available Switches list and click the right arrow to move to the Selected
4. Click OK on the Select Switch dialog box.
Selecting an end device port from a list of available device ports
To select the port for the source or destination device, complete the following steps.
1. Click the ellipses button to the right of the Source or Destination field.
2. Select one of the following options to display either ports in specific zones or available fabrics,
1144
When the flow definition activates, the Flow Vision dialog box displays with the new flow
selected (highlighted) in the Flow Definitions table. To review the sub-flow data for the selected
flow (refer to "Monitoring a Flow Monitor flow"
The Select Switch dialog box displays with all Fabric Vision-capable switches listed in the
Available Switches list.
Vision-capable devices.
Switch list.
Move the switch back to the Available Switches list by clicking the left arrow.
The selected switch displays in the Target Switch field.
The Select Device Port dialog box displays expanded to display all supported device ports for
the target switch in the Available Device Ports list.
Unsupported ports do not display in the Available Device Ports list.
devices, and ports for selection.
•
Select Products and Ports from the Show list to display available fabrics, devices, and
ports as in Figure 498.
•
Select Zones from the Show list to display available ports under specific zones as shown in
Figure 499.
on page 1149").
Brocade Network Advisor SAN User Manual
53-1003154-01