Defining The Report Identity - Brocade Communications Systems WFT-2D User Manual

32
Event custom reports
6. Data for all attributes is sorted in ascending order and is sorted in the sequence that the
7.

Defining the report identity

The Identification tab in the Event Custom Reports dialog box allows you to enter the identity
information of the report information.
To define the report identity, complete the following steps.
1. Select Reports > Event Custom Reports.
2. Click the Add button.
3. The Add/Edit Report Definition dialog box - Product tab displays.
4. Click the Identification tab.
1308
•
If you selected the Count column, the Management application adds the First Seen and
Last Seen columns to a report.
•
For products that support stacking, the Port column shows the port.
attributes appear in the Sort By Columns list. In the Selected Columns list, select which
attribute will be used to sort the generated report. Then click the right arrow button to move
your selection to the Sort by Columns list. To remove an entry from the Sort by Columns list,
select the entry, then click the left arrow button.
Click OK to save the definition, Run to launch the report, or click the Identification tab to
display the parameters that you use to identify the definition.
The Event Custom Reports dialog box displays.
The Add/Edit Report Definition dialog box - Identification tab, shown in
FIGURE 566 Add/Edit Report Definition dialog box - Identification tab
Figure 566, displays.
Brocade Network Advisor SAN User Manual
53-1003154-01