Brocade Communications Systems WFT-2D User Manual page 502

11
LDAP server configuration
19. Close the Management console.
20. Restart the AD server.
Configuring the Active Directory Schema on the LDAP server
1. Select Start > Run.
2. Type regsvr32 schmmgmt.dll and press Enter.
3. Select Start > Run.
4. Type mmc and press Enter.
5. Select File > Add/Remove Snap-in.
6. Click Add.
7.
8. Click Close on the Add Standalone Snap-in dialog box.
9. Click OK on the Add/Remove Snap-in dialog box.
10. Save this schema by selecting File > Save As.
11. Browse to the following location: C:\Windows\System32.
12. Change the extention to .msc and click Save.
13. Select Start > Run.
14. Type schema_name.msc and press Enter.
Configuring authorization details on the external LDAP server
Open the ADSI Edit dialog box on the Active Directory installed server.
1. Select Start > Run.
2. Type adsiedit.msc and press Enter.
3. Right-click CN=User_Name in the CN=Users directory and select Properties.
450
After you restart the AD server, go to
server" on page 450.
Make sure that the following message displays: Dll register Server in schmmgmt.dll
succeeded.
The Add/Remove Snap-in dialog box displays.
The Add Standalone Snap-in dialog box displays.
Select Active Directory Schema from the Available standalone snap-ins list and click Add.
The Active Directory Schema displays in the Add/Remove Snap-in dialog box.
Make sure that the schema that you just saved launches successfully. To configure roles and
AORS for this schema, go to
on page 448.
The ADSI Edit dialog box displays.
Where User_Name is the name of the user you created in
page 447. The CN=User_Name Properties dialog box displays.
"Configuring authorization details on the external LDAP
step 8 of "Configuring roles and AORs on the external LDAP server"
"Creating an AD user account"
Brocade Network Advisor SAN User Manual
53-1003154-01
on