Stopping Port Auto Disable on a device
NOTE
Port Auto Disable requires devices running Fabric OS 7.2 or later.
You can disable PAD at the device level. This allows you stop PAD for the device regardless of the
individual port setting.
To stop PAD on a device, complete the following steps.
1. Select Monitor > Port Auto Disable.
2. Select the fabric on which you want to configure PAD from the Fabric list.
3. Select All Ports from the Show list, if necessary.
4. Select the device on which you want to stop PAD.
5. Click Disable (under Switch).
6. Click OK on the Port Auto Disable dialog box.
Resuming Port Auto Disable on a device
NOTE
Port Auto Disable requires devices running Fabric OS 7.2 or later.
You can enable PAD at the device level. This allows you resume PAD for the device regardless of the
individual port setting.
To resume PAD on a device, complete the following steps.
1. Select Monitor > Port Auto Disable.
2. Select the fabric on which you want to configure PAD from the Fabric list.
3. Select All Ports from the Show list, if necessary.
4. Select the device on which you want to resume PAD.
5. Click Enable (under Switch).
6. Click OK on the Port Auto Disable dialog box.
Brocade Network Advisor SAN User Manual
53-1003154-01
The Port Auto Disable dialog box displays.
PAD stops on all ports for the selected device.
The Port Auto Disable dialog box displays.
Press CTRL and click to select multiple devices.
PAD resumes on the selected device.
12
Port Auto Disable
551