An Existing Definition - Brocade Communications Systems WFT-2D User Manual

32
Pseudo events
3. From the Available Traps list, select the trap for the down state of a product or interface.
4. Select a trap for the Selected Down Trap list and a trap for the Selected Up Trap list.
5. You can change the text associated with the selected trap by doing either of the following:
6. Click Next to advance to the Summary pane.
7.
Creating a pseudo event definition by copying an existing definition
To create a pseudo event definition by copying an existing definition, complete the following steps.
1. Select Monitor > Event Processing > Pseudo Events.
2. Select the pseudo event definition that you want to copy from the Pseudo Events list.
3. Click the Duplicate button.
1298
FIGURE 563
Events pane of the Add Pseudo Event dialog box
By default, all the traps known to the Management application are grouped under the Fabric
OS, root nodes and are included in the Available Traps list, which is a list of all traps that are
available based on the MIB and filter criteria.
You cannot select the same trap for up and down conditions. Move the traps from the Available
Traps list to the Selected Down Trap and Selected Up Trap lists using the right arrow button.
•
Select one of the following options:
-
MIB Information, if you want the default SNMP name for the traps to be displayed.
-
MIB Alias, if you want the aliases for the traps to be displayed.
•
Use the Trap Filter tool to limit the trap severity. To use this tool, click the Filter button to
display the Trap Filters dialog box.
Click Finish to save your definition. The new pseudo event appears on the Pseudo Event list on
the Pseudo Event dialog box.
Brocade Network Advisor SAN User Manual
53-1003154-01