Brocade Communications Systems WFT-2D User Manual page 1273

5. Select the measures you want to display in the graph in the Select Network Objects and
6. Remove measures from the graph by selecting the measure beneath the graph and clicking
7.
8. Create a flow performance monitor on the Dashboard by clicking Save As Widget.
9. Click Close to close the dialog box.
Defining flows using Historical/Real-time performance graph
1. Select the port for which you want to generate a performance graph.
2. Select Monitor > Performance > Historical Graph or Real-Time Graph. The Historical or
3. Make changes to the fields as required.
4. Select any of the column in Additional Measures table and click Add Flow button to launch Add
Refer to
Replacing Top Talker monitors
For platforms running Fabric OS 7.2 or later, Flow Vision replaces Top Talker monitoring. To use
Flow Vision to configure a Top Talker monitor, complete the following steps.
1. Note any existing Top Talker monitors (refer to
2. Delete existing monitors (refer to
3. Create a flow to define an initiator and target port pair for monitoring (refer to
To continue using the legacy Top Talker feature, you must deactivate existing flows defined for the
switch (refer to
Replacing End-to-End monitors
For platforms running Fabric OS 7.2 or later, Flow Vision replaces End-to-End monitoring. To use
Flow Vision to configure an End-to-End monitor, complete the following steps.
1. Note any existing End-to-End monitors (refer to
2. Delete existing monitors (refer to
3. Create a flow to define an initiator and target port pair for monitoring (refer to
Brocade Network Advisor SAN User Manual
53-1003154-01
Measures list and click the right arrow button.
Select multiple measures by holding down the CTRL key and clicking more than one measure.
Select all measures for a flow by selecting the flow.
the left arrow button.
Configure the look and feel of the graph using the procedure in
graph" on page 1790".
For step-by-step instructions, refer to
graph" on page 434".
Real-time performance graph displays.
flow dialog box to define flows.
"Creating a Flow Monitor flow definition"
Top Talker monitor flow" on page 1158").
"Deactivating flows"
end-to-end monitor flow" on page 1156").
Flow Vision interoperability with other features
"Configuring a traffic flows monitor from a performance
on page 1140" for more information.
"SAN Top Talker monitoring"
"Deleting a Top Talker monitor"
on page 1137").
"SAN end-to-end monitoring"
"Deleting an end-to-end monitor pair"
29
"Configuring the performance
on page 1758").
on page 1763").
"Configuring a
on page 1752").
on page 1758").
"Configuring an
1221