Brocade Communications Systems WFT-2D User Manual page 743

7.
8. Click OK on the Logical Switches dialog box.
9. (Optional) Select the Unbind Port Addresses while moving them check box.
10. Click Start to send these changes to the affected chassis.
11. When the changes are complete, click Close.
Brocade Network Advisor SAN User Manual
53-1003154-01
Click OK on the Edit Properties dialog box.
The Base Switch column in the Existing Logical Switches list now displays Yes for the logical
switch.
The Logical Switch Change Confirmation and Status dialog box displays with a list of all
changes you made in the Logical Switches dialog box.
The Re-Enable ports after moving them and QoS disable the ports while moving them check
boxes are selected by default.
NOTE
Ports are disabled before moving from one logical switch to another.
NOTE
Most changes to logical switches will disrupt data traffic in the fabric.
The status of each change is displayed in the Status column and Status area in the dialog box.
Configuring Virtual Fabrics
19
691