Brocade Communications Systems WFT-2D User Manual page 547

TABLE 43
Field/Component
Right and left arrow buttons
Selected Switches table
TABLE 44
Field/Component
Validation Settings table
Disable Destination Switch check box
TABLE 45
Field/Component
Summary table
Brocade Network Advisor SAN User Manual
53-1003154-01
Step 5. Destination Switches (Continued)
Product Type
Protocol
Serial #
Speed Configured (Gbps)
State
Status
Symbolic Name
Tag
Vendor
WWN
Zone Alias
Switch Name
IP
WWN
Current Firmware
Status
Step 6. Validation
Step 7. Summary
Configuration file management
Description
The type of product.
The protocol for the port.
The serial number of the switch.
The actual speed of the port in Gigabits per second.
The port state, for example, online or offline.
The operational status of the port.; for example, unknown or marginal.
The symbolic name for the port.
The tag number of the port
The hardware vendor's name.
The world wide name of the source switch to be replicated.
The zone alias.
Click to move the switches back and forth between the Available
Switches table and the Selected Switches table.
Lists the switches selected as the destination switches.
The name of the switch selected to be the destination switch.
The IP address of the switch selected to be the destination switch.
The world wide name of the switch selected to be the destination switch.
The current firmware.
The status of the switch .
Description
The replication settings that have been configured in previous steps; for
example, the configuration type, source configuration, and destination
settings. Click Finish to approve the settings.
Select to disable the destination switch during replication.
Description
The replication settings that have been successfully applied to the
selected destination switches; for example, the configuration type,
source configuration, and destination settings. Click Close to close the
dialog box.
12
495