Removing Thresholds; Removing Thresholds From Individual Objects - Brocade Communications Systems WFT-2D User Manual

24

Removing thresholds

4. Review the Thresholds table.
5. Click Close on the Switch Thresholds dialog box.
6. Click OK on the Port Fencing dialog box.
Removing thresholds
When you assign a new threshold to an object, the threshold that was active on that object is
automatically removed. The Management application also allows you to remove thresholds from an
individual Fabric, Switch, or Switch Port, from all Fabrics, Switches, and Switch Ports at once, as
well as from the Threshold table.

Removing thresholds from individual objects

To remove thresholds from the All Fabrics object, an individual Fabric, Chassis group, Switch, or
Switch Port, complete the following steps.
1. Select Monitor > Fabric Watch > Port Fencing.
2. Select a threshold type from the Violation Type list.
3. Select the object with the threshold you want to remove in the Ports table.
4. Click the left arrow.
1014
•
# (Number) — The line number for each threshold in the table.
•
Status — The threshold status.
•
Directly Assigned Indicator — Whether or not the threshold was directly assigned.
•
Name — The threshold name.
•
Limit — The number of events required to trigger the threshold.
•
Period — The time limit required (for the number of events) to trigger a port blocking action.
•
Area — The threshold type.
•
Class — The port type.
•
Disabled on Ports — The port numbers on which the threshold is disabled.
The Port Fencing dialog box displays.
NOTE
If the selected object inherits a threshold assignment from an object higher in the tree, you
cannot remove the threshold. However, you may assign a different threshold directly to the
selected subordinate objects or change the assignment on the higher object.
A removed icon ( ) displays next to every instance where the threshold was removed from a
selected object and it does not inherits a threshold from higher in the tree.
Brocade Network Advisor SAN User Manual
53-1003154-01