Viewing Disk Lun Rekeying Details - Brocade Communications Systems StoreFabric SN6500B Administrator's Manual

2
Rekeying all disk LUNs manually
.
FIGURE 71

Viewing disk LUN rekeying details

You can view details related to the rekeying of a selected target disk LUN from the LUN Re-keying
Details dialog box.
1. Select Configure > Encryption from the menu task bar to display the Encryption Center
2. Select a group, switch, or engine from the Encryption Center Devices table, then select
3. Select a Target storage device, then select Group/Switch/Engine > Disk LUNs.
FIGURE 72
104
Pending manual rekey operations
dialog box (Refer to Figure 1
Group/Switch/Engine > Targets, or right-click the group, switch, or engine and select Targets.
NOTE
You can also select a group, switch, or engine from the Encryption Center Devices table, then
click the Targets icon.
The Encryption Targets dialog box displays.
The Encryption Target Disk LUNs dialog box displays
must add LUNs manually.
Encryption Target Disk LUNs dialog box
on page 14).
(Figure
Fabric OS Encryption Administrator's Guide (SKM/ESKM)
72). Initially the list is empty. You
53-1002721-01