Brocade Communications Systems WFT-2D User Manual page 520

11
SMI Agent Configuration Tool
4. Click Apply.
5. Click Close to close the SMIA Configuration Tool dialog box.
Configuring the CIMOM Bind Network Address
NOTE
You must have SAN - SMI Operation Read and Write privileges to view or make changes on the
CIMOM tab. For more information about privileges, refer to
To configure the network bind address, complete the following steps.
1. Click the CIMOM tab.
2. Select a network address from the IP Configuration Bind Network Address list to which you
3. Click Apply.
4. Click Close to close the SMIA Configuration Tool dialog box.
468
NOTE
Changes on this tab take effect after the next CIMOM server restart.
NOTE
You can only restart the server using the Server Management Console (Start > Programs >
Management_Application_Name 12.X.X > Server Management Console).
If you disabled SSL, a confirmation message displays. Click Yes to continue.
want to bind the CIMOM server.
The default network address is the host system name.
NOTE
Changes on this tab take effect after the next CIMOM server restart.
NOTE
You can only restart the server using the Server Management Console (Start > Programs >
Management_Application_Name 12.X.X > Server Management Console).
"User Privileges" on page 1451.
Brocade Network Advisor SAN User Manual
53-1003154-01