Editing An Fcoe Login Group - Brocade Communications Systems WFT-2D User Manual

16
FCoE login groups
5. Select one of the following Available Member options:
6. Select available members from the Products/Ports list and click the right arrow button to move
7.
8. Review the changes carefully before you accept them.
9. Click Start to apply the changes, or click Close to abort the operation.

Editing an FCoE login group

Complete the following steps to edit the name of a login group. You can manually add ports by
entering the world wide name (WWN) or select available managed CNAs from all discovered hosts.
Only directly-connected devices are supported.
1. Select Configure > FCoE from the menu bar.
2. Select a group from the Login Groups list and click Edit.
3. Perform one of the following editing tasks:
648
•
Port WWN — Click to enter the world wide name (WWN) of the port to associate with the
selected switch. The member port WWN text field allows a maximum of 16 digits.
•
Managed CNAs — Click to show a list of products and ports which can be selected as login
group members.
the available members to the Selected Members list.
Click OK.
The FCoE Login Group Confirmation and Status dialog displays.
On closing the FCoE Login Group Confirmation and Status dialog box, the FCoE Configuration
Dialog refreshes the data and the latest information is displayed.
The Edit Login Group dialog box displays, as shown in
FIGURE 251
Edit Login Group dialog box
NOTE
The Fabric field and the Switch field are read-only fields.
Figure 236.
Brocade Network Advisor SAN User Manual
53-1003154-01