Brocade Communications Systems WFT-2D User Manual page 492

11
AAA Settings tab
Configuring a TACACS+ server
To add or edit a TACACS+ server, complete the following steps.
1. Choose one of the following options from the AAA Settings tab:
2. Enter the TACACS+ server's hostname in the Network Address field.
3. Enter the TCP port used by the TACACS+ server in the TCP Port field.
4. Enter the shared secret in the Shared Secret and Confirm Secret fields.
5. Enter the timeout timer value (in seconds) that specifies the amount of time to wait between
6. Enter the number of attempts to be made to reach a server before assuming it is unreachable
7.
440
•
Click Add.
•
Select an existing TACACS+ server and click Edit.
The Add or Edit TACACS+ Server dialog box displays
FIGURE 182
Add or Edit TACACS+ Server
If DNS is not configured in your network, provide an IP address instead of the hostname.
Default is 49.
retries when the server is busy in the Timeout (Sec) field.
Default is 3 seconds.
in the Attempts field.
Default is 3 attempts.
Click OK to return to the AAA Settings tab.
The Radius Servers and Sequence table displays the following information:
•
Network Address — The network address of the TACACS+ server.
•
TCP Port — The TCP port number of the LDAP server.
•
TimeOut (Sec) — The timeout value in seconds specified when sending an authentication
request to the server. Default is 3.
•
Attempts — The number of attempts made to reach a server before determining it is
unreachable. Default is 3.
(Figure 180).
Brocade Network Advisor SAN User Manual
53-1003154-01