Viewing Existing Configuration Policy Managers - Brocade Communications Systems WFT-2D User Manual

Viewing existing configuration policy managers

To view existing configuration policy managers, complete the following steps.
1. Select Monitor > Configuration Policy Manager
2. Review the configuration policy manager details:
3. To add a configuration policy manager, click Add (refer to
4. To edit the selected configuration policy manager, click Edit (refer to
Brocade Network Advisor SAN User Manual
53-1003154-01
The Configuration Policy Manager dialog box displays.
FIGURE 529
Configuration Policy Manager dialog box
•
Name — The user-defined name of the policy.
•
Description — A description of the policy.
•
Alert — Select to receive e-mail alerts and have the configuration policy manager status
icon display in the status bar when the monitor fails or partially fails.
•
Frequency — The frequency (one time, hourly, daily, weekly, or monthly) at which the policy
is scheduled.
•
Next Run — The time the policy will run again.
•
Last Run — The time the policy ran last.
•
Result — The result of the last configuration policy manager run. There are four possible
results: Passed, Partially Failed, Failed, and Not Applicable.
•
Acknowledged — Whether the policy is acknowledged or not. Select the check box to
acknowledge the policy. Disabled when the associated Acknowledged check box is
cleared.
manager" on page 1240).
policy manager" on page 1247).
Viewing existing configuration policy managers
(Figure 529).
"Adding a configuration policy
31
"Editing a configuration
1239