Adding Or Editing An Event Report Schedule - Brocade Communications Systems WFT-2D User Manual

From the Schedules tab of the Event Custom Reports dialog box, you can perform the following
tasks:
•
•
•
•
•
•
•

Adding or editing an event report schedule

The Add Schedule dialog box, shown in
and configure the parameters, such as the schedule's format, frequency, recipients, and message
content, for when the report is run and to whom the report is sent.
To add or edit an event report schedule, complete the following steps.
1. Select Reports > Event Custom Reports.
2. Click the Schedules tab.
3. Click the Add button.
Brocade Network Advisor SAN User Manual
53-1003154-01
View — Displays the report data of the scheduled report definition. The View button is not
enabled for a report that is listed as Not Available.
Add — Launches the Add Schedule dialog box.
Edit — Launches the Edit Schedule dialog box with the selected schedule information
pre-populated.
Duplicate — Creates a copy of the selected report schedule.
Delete — Deletes the selected schedule from the Schedules list.
Enable — Enables the selected schedule.
Disable — Disables the selected schedule.
The Event Custom Reports dialog box displays.
The Add Schedule dialog box displays.
FIGURE 571
Add Schedule dialog box
Event custom report schedules
Figure 571, allows you to select an existing report definition
32
1315