Deleting Cimom Server Credentials; F_Port Commissioning - Brocade Communications Systems WFT-2D User Manual

12
Port commissioning

Deleting CIMOM server credentials

1. Select Configure > Port Commissioning > Setup.
2. Select one or more CIMOM servers from the Systems List and click the left arrow button.
3. Confirm that this is the CIMOM server you want to delete and click OK to delete the CIMOM

F_Port commissioning

Although you can use any of the following methods to access the F_Port commissioning
commands, individual procedures only include one method.
•
•
•
•
Decommissioning an F_Port
NOTE
You must configure at least one CIMOM server (refer to
before you can decommission an F_Port.
NOTE
Fabric tracking must be enabled (refer to
decommissioned port details (such as port type, device port WWN, and so on). Do not accept
changes in the Management application client.
1. Select the F_Port, and then select Configure > Port Commissioning > Decommission > Port.
2. Choose one of the following options:
532
The Port Commissioning Setup dialog box displays
The details for the last selected CIMOM server row displays in the Add/Edit System and
Credentials area.
server from the Port Commissioning Setup dialog box.
When the deletion is complete, an application event displays in the Master Log detailing
success or failure.
From the main menu, select the F_Port in the Product List or Topology, and then select
Configure > Port Commissioning > Decommission/Recommission > Port.
From the Product List, right-click the F_Port and select Decommission/Recommission > Port.
From the Topology, right-click the F_Port and select Decommission/Recommission > Port.
From a Dashboard widget, right-click the F_Port and select Decommission/Recommission >
Port.
The Port Commission Confirmation dialog box displays.
•
Apply Default Settings (default) — Select to have the Management application contact all
registered CIMOM servers within the fabric affected by the action and obtain the status
from each CIMOM server.
(Figure 215).
"Registering a CIMOM server"
"Enabling fabric tracking"
Brocade Network Advisor SAN User Manual
on page 526)
on page 289) to maintain the
53-1003154-01