Brocade Communications Systems WFT-2D User Manual page 1195

15. Enter the egress port data in Port (slot/port) or D,I (domain ID,port number) format in the
16. For FCR or virtual fabrics, select one of the following format options for FCR/XISL mode:
17. For FCR or virtual fabrics, enter the fabric ID or virtual fabric ID in the Source field.
18. For FCR or virtual fabrics, enter the fabric ID or virtual fabric ID in the Destination field.
19. (Local Flow Mirroring only) Enter the mirror port number in the Mirror field or click the ellipsis
20. Enter a frame type in the Frame Type field or click the ellipses button select a frame type from
21. Enter a LUN ID in the LUN field or click the ellipses button to select a LUN ID from the list.
Brocade Network Advisor SAN User Manual
53-1003154-01
Egress field or click the ellipsis button to select a port from the list.
Enter an asterisk (*) to use any port. To select the egress port from a list, refer to
ingress or egress port from a list of available switch ports"
NOTE
You must enter the slot number and the port number for the chassis, the slot number cannot
be 0 (zero). For switches, you must enter the port number without any slot number.
•
Fabric ID — Select to configure a flow definition for a FCR fabric.
•
VFID (Virtual Fabric ID) — Select to configure a flow definition for virtual fabrics.
Enter an asterisk (*) to use any port. To select the source from a list, refer to
or virtual fabric ID from a list of available products"
Enter an asterisk (*) to use any port. To select the destination from a list, refer to
fabric or virtual fabric ID from a list of available products"
button to select a port from the list.
Only enabled when you select the Local Flow Mirroring option for the Mirror feature. Only
supported on 16 Gbps-capable ports on devices running Fabric OS 7.3 or later.
To select a port from a list, refer to
page 1148".
a list.
NOTE
You cannot combine frame type and bidirectional parameters for Mirror flows.
To select a frame type from a list, refer to
on page 1148".
NOTE
You cannot use LUN IDs for Bidirectional flows.
NOTE
You cannot combine frame type, LUN, and bidirectional parameters for learning flows.
LUN IDs can be from 0 through 65535. To select a LUN ID from a list, refer to
ID from a list of available LUNs"
on page 1147".
"Selecting a mirror port from a list of available ports"
"Selecting a mirror port from a list of available ports"
on page 1149".
Flow Monitor
"Selecting an
on page 1146".
"Selecting a fabric
"Selecting a
on page 1147".
"Selecting a LUN
29
on
1143