Monitoring A Flow Mirror Flow - Brocade Communications Systems WFT-2D User Manual

29
Flow Mirror
17. For FCR or virtual fabrics, enter the fabric ID or virtual fabric ID in the Source field.
18. For FCR or virtual fabrics, enter the fabric ID or virtual fabric ID in the Destination field.
19. (Local Flow Mirroring only) Enter the mirror port number in the Mirror field or click the ellipsis
20. Enter a frame type in the Frame Type field or click the ellipsis button to select a frame type
21. Enter a LUN ID in the LUN field or click the ellipsis button to select a LUN ID from the list.
22. Click OK to save the flow definition.

Monitoring a Flow Mirror flow

To monitor the summary data for a Flow Mirror flow, complete the following steps.
1. Select the device on which you defined the mirror flow and select Monitor > Fabric Vision >
2. Select the mirror flow that you want to monitor in the Flow Definitions table.
1194
Enter an asterisk (*) to use any port. To select the source from a list, refer to
or virtual fabric ID from a list of available products"
Enter an asterisk (*) to use any port. To select the destination from a list, refer to
fabric or virtual fabric ID from a list of available products"
button to select a port from the list.
Only enabled when you select the Local Flow Mirroring option for the Mirror feature. Only
supported on 16 Gbps-capable ports on devices running Fabric OS 7.3 or later.
To select a port from a list, refer to
page 1148".
from a list.
To select a frame type from a list, refer to
on page 1148".
NOTE
You cannot use LUN IDs for Bidirectional flows.
NOTE
You cannot combine frame type, LUN, and bidirectional parameters for learning flows.
LUN IDs can be from 0 through 65535. To select a LUN ID from a list, refer to
ID from a list of available LUNs"
When the flow definition activates, the Flow Vision dialog box displays with the new flow
selected (highlighted) in the Flow Definitions table. To review the sub-flow data for the selected
flow, refer to "Monitoring a Flow Mirror flow"
Flow > Monitor.
The Flow Vision dialog box displays pre-populated with a list of all defined flows in the Flow
Definitions table. For more information about the fields and components of the Flow
Definitions table, refer to
"Selecting a mirror port from a list of available ports"
"Selecting a mirror port from a list of available ports"
on page 1149".
on page 1194".
"Flows Definitions table fields and components"
"Selecting a fabric
on page 1147".
on page 1147".
on page 1134".
Brocade Network Advisor SAN User Manual
"Selecting a
on
"Selecting a LUN
53-1003154-01