Brocade Communications Systems WFT-2D User Manual page 711

5. To add a new ACL rule, complete
6. To delete an existing ACL rule, select the rule you want to edit in the ACL Entries list and click
7.
8. Click OK on the Device_Name - Layer 2 ACL Configuration dialog box.
Assigning a Layer 2 ACL configuration to an interface (Fabric OS)
To assign Layer 2 ACL configuration to a interface, complete the following steps.
1. Select Configure > Security > Layer 2 ACL > Port.
2. Select a port or Link Aggregation Group (LAG) in the Available Ports list and click the right arrow
3. Click OK.
4. Select the Assign ACL option and choose one of the following options from the first Assign ACL
Brocade Network Advisor SAN User Manual
53-1003154-01
configuration (Fabric OS)"
The new ACL entry displays in the ACL Entries list. To add additional ACL entries, repeat
the left arrow button.
Click OK on the Duplicate - Layer 2 ACL Configuration dialog box.
The new ACL displays in the ACL Entries list. To copy additional ACLs, repeat
step 7.
The Deploy to Products - Layer 2 ACL dialog box displays. To save the configuration, refer to
"Saving a security configuration deployment"
The Port Selection - Layer 2 ACL dialog box displays.
button.
LAGs display in the Available Ports list using the following convention: Po LAG_Number.
The Device_Name - Port_Number/LAG LAG_Number- Layer 2 ACL Configuration dialog box
displays.
FIGURE 255 Device_Name
list:
•
Select ACLs on this Product to assign ACLs deployed on the product to the port.
The second list is populated with the ACLs deployed on the switch or associated with a
save deployment object.
•
Select ACLs bound to this port to assign ACLs bound to the interface to the port.
The second list is populated with the ACLs bound to the interface.
Layer 2 access control list management
step 4 through step 12
on page 656.
on page 664
Port_Number
- - Layer 2 ACL Configuration dialog box
in "Creating an extended Layer 2 ACL
step 2
17
step 5.
through
659