Brocade Communications Systems WFT-2D User Manual page 831

8. Verify the information is correct, then click Next.
FIGURE 330
9. Review the post-configuration instructions, which you can copy to a clipboard or print for later,
10. Refer to
Brocade Network Advisor SAN User Manual
53-1003154-01
After configuration of the encryption group is completed, the Management application sends
API commands to verify the switch configuration. See
results" on page 800 for more information.
The Next Steps dialog box displays. (Refer to
certificates for the encryption switch are displayed. These instructions are specific to the key
vault type.
Next Steps dialog box
then click Finish to exit the Configure Switch Encryption wizard.
"Understanding configuration status results"
Creating a new encryption group
"Understanding configuration status
Figure 330.) Instructions for installing public key
on page 800.
20
779