Deleting An Ad Group; Tacacs+ Server Configuration - Brocade Communications Systems WFT-2D User Manual

San user manual
Table of Contents

Advertisement

10. (Optional) Enter the group name in the Group Name Filter field.
11. Click OK.
12. Click Close to close the Users dialog box.

Deleting an AD group

Deleting an AD group deletes the roles and AORs assigned to the group and removes the group
from the Active Directory Groups table.
To delete an AD group, complete the following steps.
1. Select one or more AD groups that you want to delete from the Active Directory Groups table.
2. Click Delete.
3. Click Yes on the confirmation message.
4. Click OK on the deletion successful message.
5. Click OK to save your work.

TACACS+ server configuration

NOTE
You must configure an TACACS+ server as the primary authentication server (refer to
TACACS+ server authentication"
If you are using a TACACS+ server for authentication, complete the following preperations on the
TACACS+ server:
1.
2.
3.
Brocade Network Advisor SAN User Manual
53-1003154-01
You can specify the group name in the following formats:
User, Domain - Will fetch the group name that contains the user or the operator.
User*, Domain - Will fetch the group name that starts with the user and contains the
operator.
User, *Domain - Will fetch the group name that starts with the user and ends with the
operator.
*User*, Domain - Will fetch the group name that contains the user or the operator.
The Active Directory Groups table displays with all AD groups available in the specified LDAP
server, as well as any AD groups already mapped in the Management application server (local
database).
To assign or remove roles and AORs, refer to
page 451 or
"Removing roles and AORs from an AD group"
"Configuring Management application data on the Radius server"
"Configuring user authorization for the Radius server"
"Configuring the dictionary file for the Radius server"
TACACS+ server configuration
"Assigning roles and AORs to an AD group"
on page 438).
on page 446
on page 451.
on page 445.
on page 446
11
on
"Configuring
453

Advertisement

Table of Contents
loading

This manual is also suitable for:

Network advisor 12.3.0

Table of Contents