Merging Two Zone Databases - Brocade Communications Systems WFT-2D User Manual

5. If the active zone configuration names are the same in each fabric, then load the offline
6. If the active configuration names are different in each fabric, rename the zone configurations
7.

Merging two zone databases

If a zone or zone configuration is merged, the resulting zone or zone configuration includes all
members that were marked for addition or removal as well as all members not otherwise marked.
1. Select Configure > Zoning > Fabric.
2. Select Compare from the Zone DB Operation list.
FIGURE 422
3. Select a database from the Reference Zone DB list.
Brocade Network Advisor SAN User Manual
53-1003154-01
repository, and activate the zone configuration on each fabric.
to be the same, and copy the zones.
Ensure that the active configurations are the same.
a. Load the newly created offline zone database.
b. Add the active zones to the zone configuration that is the active configuration on the other
fabric.
c. Rename the inactive configuration.
The Zoning dialog box displays.
The Compare/Merge Zone DBs dialog box displays, as shown in
Compare/Merge Zone DBs dialog box
Zoning configuration
Figure 422.
21
907