Viewing A Configuration Policy Manager Report - Brocade Communications Systems WFT-2D User Manual

4. Review the report details (refer to
5. Click the close button (X) on the Policy_Name - Configuration Policy Manager Report browser
6. Click Close on the Configuration Policy Manager dialog box.

Viewing a configuration policy manager report

NOTE
You must run the configuration policy manager at least once before you can view a report.
To view an existing configuration policy manager report, complete the following steps.
1. Select Monitor > Configuration Policy Manager.
2. Select the policy for which you want to view a report in the Monitors list.
Brocade Network Advisor SAN User Manual
53-1003154-01
FIGURE 534 Policy_Name
- Configuration Policy Manager Report
page 1249).
To export a report, refer to
To e-mail a report, refer to
window.
The Configuration Policy Manager dialog box displays.
Viewing a configuration policy manager report
"Viewing a configuration policy manager report"
"Exporting a configuration policy manager report"
"Exporting SAN reports" on page 1404.
31
on
on page 1252.
1249