Troubleshooting Vm Manager Discovery - Brocade Communications Systems WFT-2D User Manual

3
VM Manager discovery
3. Refresh the Discover VM Managers list by clicking Refresh.
4. Click Close on the Discover VM Managers dialog box.

Troubleshooting VM manager discovery

If you encounter discovery problems, complete the following checklist to ensure that discovery was
set up correctly.
Verify IP connectivity by issuing a ping command to the switch.
1. Open the command prompt.
2. From the Server, type
72
The following are samples of actual ESX host status messages:
•
Active
•
Discovery pending,
•
Excluded,
•
Conflict – Existing Host <hostname>
ping .
Device_IP_Address
Brocade Network Advisor SAN User Manual
53-1003154-01