Brocade Communications Systems WFT-2D User Manual page 1363

5. To limit the search results to traps, syslog, and pseudo event messages with a specific text
6. To limit the search results to traps, syslog, and pseudo event messages from a specific IP
7.
8. Select the severity from the Available Severity list, and click the right arrow button to move your
Brocade Network Advisor SAN User Manual
53-1003154-01
FIGURE 568
Add/Edit Report Definition dialog box - Filter tab
string, enter the text string in the Description field.
You can use an asterisk (*) to indicate a wildcard, as in the following examples:
•
*cdef: Matches a message ending with cdef
•
abc*: Matches a message beginning with abc
•
*abc*: Matches a message that contains abc
For example, if you want to find the events that have the text "Auth" in the message, enter
"*Auth*".
NOTE
You can view all port history events for a switch by creating an event custom report and
entering a description of Port Login/Logout History for that particular switch. The Port
Login/Logout history trap will be listed under the Available traps list of the Add Trap Filter
dialog box and the Add Event Action dialog box — Events pane.
For information about event categories, refer to
address, enter the IP address or the AP MAC address in the Address field. You can enter
multiple addresses. Separate each address with a comma.
Select the Acknowledge check box if you want messages that have been acknowledged to be
included in the report.
selection to the Selected Severity list. Events with the selected severity are included in the
report.
Event custom reports
"Event Categories" on page 1443.
32
1311