Brocade Communications Systems WFT-2D User Manual page 857

FIGURE 363
7.
Brocade Network Advisor SAN User Manual
53-1003154-01
The Configuration Status dialog box displays. (Refer to
Configuration Status dialog box
All configuration items have green check marks if the configuration is successful. A red stop
sign indicates a failed step. A message displays below the table, indicating the encryption
switch was added to the group you named, and the public key certificate is stored in the
location you specified.
Review important messages, then click Next.
The Error Instructions dialog box displays. (Refer to
public key certificates for the encryption switch are displayed. These instructions are specific
to the key vault type.
Adding a switch to an encryption group
Figure 363.)
Figure 364.) Instructions for installing
20
805