Brocade Communications Systems WFT-2D User Manual page 1074

25
Configuring a switch for FICON operation
8. As an optional step, manage switch users by selecting the User tab on the Web Works Switch
9. To download firmware to the switch, select Configure > Firmware Management from the SAN
10. Select the Download tab
1022
d. Click Add License.
e. Repeat steps b through d for additional licenses.
f. Click Refresh to display new licenses in the License tab.
Administration window. Use this tab to add users, change passwords, or perform other steps to
manage switch users.
NOTE
If you change the password for a user that was used for Management application discovery,
you must delete the switch from the Discover Fabrics dialog box, and then discover the switch
again with the new login credentials.
tab on the Management application window as shown in
FIGURE 464 Selecting Firmware Management from Configure menu
The Firmware Management dialog box displays.
(Figure
Figure 464
465).
Brocade Network Advisor SAN User Manual
on page 1022.
53-1003154-01