Maps Actions - Brocade Communications Systems WFT-2D User Manual

MAPS actions

MAPS provides actions (event notifications) in several different formats to ensure that event details
are accessible from all platforms and operating systems. In response to an event, MAPS can record
event data as any (or all) of the following alarm options.
To enable MAPS actions, refer to
page 1349. For example, if you define a rule in the Management application with an SNMP action
and a violation of that rule occurs, the switch with the violation only sends the SNMP trap if you
configured SNMP on that switch.
Status
NOTE
Status is available for all measures in the Switch Status category and the flash usage measure in
the Resource category.
When a threshold is triggered, the switch status changes to a marginal or critical status icon on the
Dashboard and SAN tabs. Marginal status displays with a yellow icon. Critical status displays with a
red icon.
SFP Marginal
NOTE
SFP Marginal is available for SFP transceiver measures in the Port category.
When a threshold is triggered, the SFP transceiver status changes to a marginal status icon on the
Dashboard and SAN tabs. Port SFP transceiver measures include Current, Receive Power, Transmit
Power, Voltage, Temperature, and Power On Hours. Marginal status displays with a yellow icon in
the Port Optics dialog box.
RAS log events
Following an event, MAPS adds an entry to the internal event log for an individual switch. The RAS
log stores event information but does not actively send alerts.
Port decommission
Port decommission automatically takes ports offline when the configured thresholds in a rule are
exceeded. Port fencing is auto-enabled if port decommission is enabled for a MAPS rule or action.
You can enable port decommissioning for F_Ports only.
Fence
Fence the port, if port fencing is enabled. Port fencing takes the ports offline if the user-defined
thresholds are exceeded. Supported port types include physical ports, E_Ports, optical F_Ports
(FOP_Ports), copper F_Ports (FCU_Ports), and Virtual E_Ports (VE_Ports).
Brocade Network Advisor SAN User Manual
53-1003154-01
"Enabling or disabling policy actions for all policies"
33
MAPS actions
on
1347