Replicating Configurations - Brocade Communications Systems WFT-2D User Manual

12
Configuration file management

Replicating configurations

NOTE
This feature requires a Trial or Licensed version.
You can replicate a switch SNMP configuration, the Fabric Watch configuration, Trace Destination
configuration, or the entire configuration.
1. Select Configure > Configuration File > Replicate > Configuration.
•
•
•
•
•
•
•
2. To proceed to the next step in the wizard, click Next. To return to the previous screen, click
TABLE 40
Field/Component
All FC option
Partial FC option
All DCB option
492
A wizard is launched to guide you through the process. The first step of the wizard, Overview,
displays. There are seven steps in the Replicate Switch Configuration:
Overview, which describes the wizard.
Configuration Type, which allows you to select the type of configuration you wish to replicate.
For more information about the fields and components of this step, refer to
page 492.
Source Location, which allows you to select the location of the configuration you wish to
replicate. For more information about the fields and components of this step, refer to
on page 493.
Source Configuration, which allows you to select the source switch to replicate. For more
information about the fields and components of this step, refer to
Destination Switches, which allows you to select the destination switch. For more information
about the fields and components of this step, refer to
Validation, which lists the configuration settings that you can validate before you replicate. For
more information about the fields and components of this step, refer to
Summary, which lists the replication settings that successfully ran on all the selected
destination switches. For more information about the fields and components of this step, refer
to Table 45 on page 495.
Previous.
Step 2. Configuration Type
Table 43
Description
Replicates the entire configuration, including security settings.
Warning: This is a disruptive operation and selected destination
switches will be disabled prior to downloading the configuration.
Replicates a part of the FC configuration. Select one of the following
options:
•
Fabric Watch option — Lists switches with Fabric Watch
configurations that you can replicate.
•
SNMP option — Lists switches with SNMP configurations that you
can replicate.
Include system group configuration check box — Select to include
the SNMP system group configuration in the replication.
•
Trace Destinations option — Lists switches with trace destination
configurations that you can replicate.
Warning: This is a disruptive operation and selected destination
switches will be disabled prior to downloading the configuration.
Replicates the entire DCB startup configuration.
Brocade Network Advisor SAN User Manual
Table 40 on
Table 41
Table 42 on page 493.
on page 494.
Table 44 on page 495.
53-1003154-01