Brocade Communications Systems WFT-2D User Manual page 1038

23
Fabric Binding overview
2. Review the fabric binding membership details.
986
FIGURE 450
Fabric Binding dialog box
•
Fabric List table — Lists the fabrics in your network.
Fabric Name — The name of the fabric.

Fabric WWN — The world wide name of the fabric.

Binding Status — The binding status (enabled/disabled) of the fabric.

Enable/Disable check box — Indicates whether fabric binding is enabled. Select to

enable a fabric binding for the fabric. For step-by-step instructions, refer to
fabric binding" on page 987 and
Action — Displays any actions on the fabric.

•
Available Switches table — Lists the switches available to add to the fabric binding
membership list. For step-by-step instructions, refer to
binding membership list"
Name — The name of the switch fabric.

Node WWN — The node WWN of an available or member switch.

Domain ID — The domain ID of an available or member switch.

NOTE
You can copy (Ctrl+C) and paste (Ctrl+V) the node WWN into the Node WWN field. It does
not matter if the copy source contains colons (11:22:33:44:55:66:77), only the numbers
are pasted (11223344556677) in the Node WWN field.
Fabric Name — The name of the fabric.

Fabric WWN — The world wide name of the fabric.

"Disabling fabric binding"
on page 989.
on page 988.
"Adding switches to the fabric
Brocade Network Advisor SAN User Manual
53-1003154-01
"Enabling