Brocade Communications Systems WFT-2D User Manual page 1211

San user manual
Table of Contents

Advertisement

Configuring a Flow Monitor flow for a trunk group
NOTE
You cannot create a learned flow in a trunk group.
Flow Monitor supports monitoring trunk ports subject to the following conditions:
The following example creates four flows, one for each member of the trunk group.
1. Right-click the trunk master or slave port on which you want to monitor a flow and select Fabric
2. Enter a name (trunkflow1 (master), trunkflow2, trunkflow3, and trunkflow4) for the flow
3. Select the Source to Destination option to gather flow data from the source device to the
4. Select the Persist over switch reboots check box to persist this flow definition over reboots.
5. Select the Activate all selected features check box to immediately activate the flow after
6. Enter an asterisk (*) in the Destination field.
Brocade Network Advisor SAN User Manual
53-1003154-01
Although the flow created on the trunk master port monitors data traffic for the entire port, you
must create the same flow on all trunk member ports.
After a switch initialization or a recovery (cold or warm), existing flows are re-created on both
master and slave ports, but only those flows associated with the master port are activated.
If you create an active flow on a slave port, the flow is automatically activated when the slave
port becomes the master port.
If you create an inactive flow on a slave port, you must activate the flow manually when the
slave port becomes the master port.
Vision > Flow > Add.
The Add Flow Definition dialog box displays with the following criteria and flow identifiers
pre-populated:
Feature — Monitor
Direction — Bidirectional
Source Device — Source identifier
Destination Device — * (an asterisk allows you to use any port)
definition in the Name field.
The name cannot be over 20 characters and can only include alphanumeric characters or
underscores.
NOTE
For a physical switch, the name must be unique. However, for logical switches, the name does
not have to be unique.
destination device.
creation.
29
Flow Monitor
1159

Advertisement

Table of Contents
loading

This manual is also suitable for:

Network advisor 12.3.0

Table of Contents