Finding Zones In A Zone Configuration; Finding A Zone Configuration Member In The Zones List; Listing Zone Members - Brocade Communications Systems WFT-2D User Manual

21
Zoning administration

Finding zones in a zone configuration

Use this procedure to locate all instances of a zone in the Zone Configurations list on the Zone DB
tab.
1. Select Configure > Zoning > Fabric.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select a fabric from the Zoning Scope list.
4. Select the zone you want to find in the Zones list. (Press SHIFT or CTRL and click each zone to
5. Click Find > between the Zones list and the Zone Configurations list.

Finding a zone configuration member in the zones list

Use this procedure to locate a zone configuration member in the Zones list on the Zone DB tab.
1. Select Configure > Zoning > Fabric.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select a fabric from the Zoning Scope list.
4. Select the zone configuration member (for example, the zone) in the Zone Configurations list
5. Click Find < between the Zones list and the Zone Configurations list.

Listing zone members

Use this procedure to identify the zone in the active zone configuration of the fabric to which an
individual port belongs and the members of that zone.
If the seed switch is running Fabric OS 6.3.0 or later, the List Zone Members dialog box also
displays any active TI zones to which the port belongs.
1. Select Configure > Zoning > Fabric.
2. Click the Zone DB tab if that tab is not automatically displayed.
928
The Zoning dialog box displays.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
select more than one zone.)
If the zone is found, all instances of the zone are highlighted in the Zone Configurations list.
The Zoning dialog box displays.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
that you want to find in the Zones list. (Press SHIFT or CTRL and click each zone configuration
member to select more than one zone configuration member.)
If the zone is found, it is highlighted in the Zones list.
The Zoning dialog box displays.
Brocade Network Advisor SAN User Manual
53-1003154-01