Deleting A Configuration Policy Manager; Running A Configuration Policy Manager - Brocade Communications Systems WFT-2D User Manual

31

Deleting a configuration policy manager

4. Change the description of the policy in the Description field.
5. To edit the configuration policy manager checks, repeat
6. Click OK on the Edit Monitor dialog box.
7.
Deleting a configuration policy manager
To delete an existing configuration policy manager, complete the following steps.
1. Select Monitor > Configuration Policy Manager.
2. Select the policy you want to delete in the Monitors list.
3. Click Delete.
4. Click Yes on the confirmation message.
5. Click Close on the Configuration Policy Manager dialog box.

Running a configuration policy manager

Before you run a configuration policy manager, make sure your configuration policy managers are
valid. Valid configuration policy managers must have at least one policy selected with one or more
targets. Management checks do not require a target.
To run an existing configuration policy manager, complete the following steps.
1. Select Monitor > Configuration Policy Manager.
2. Select the policy you want to run in the Monitors list.
3. Click Run.
1248
The description cannot be over 128 characters. It cannot include asterisks.
configuration policy manager"
The updated configuration policy manager displays in the Monitors list of the Configuration
Policy Manager dialog box.
Click Close on the Configuration Policy Manager dialog box.
The Configuration Policy Manager dialog box displays.
The Configuration Policy Manager dialog box displays.
When the configuration policy manager check is complete, the Policy_Name - Configuration
Policy Manager Report displays
on page 1240.
(Figure 534) in a web browser.
step 5 through step 9 of "Adding a
Brocade Network Advisor SAN User Manual
53-1003154-01