Launching Hcm Agent - Brocade Communications Systems WFT-2D User Manual

10

Launching HCM Agent

2. Select Configure > Element Manager > Name Server.
Launching HCM Agent
Use Fabric OS HCM Agent to enable and manage Fabric OS HBAs. You can open HCM Agent directly
from the application. For more information about HCM Agent, refer to the HCM Agent
Administrator's Guide. For more information about Fabric OS HBAs, refer to the documentation for
the specific device.
To launch a Fabric OS HBA's Element Manager, complete the following steps.
NOTE
You must have Element Manager - Product Administration privileges for the selected device to
launch HCM Agent. If you do not have Element Manager - Product Administration privileges, you will
need to enter those credentials to launch HCM Agent. For more information about privileges, refer
to "User Privileges"
On the Connectivity Map, double-click the Fabric OS HBA or CNA device you want to manage.
HCM Agent displays.
OR
On the Connectivity Map, right-click the Fabric OS HBA or CNA device you want to manage and
select Element Manager.
HCM Agent displays.
OR
1. Select a Fabric OS HBA or CNA.
2. Select Configure > Element Manager > HCM.
416
The Name Server module displays.
NOTE
When you close the Management application client, any Web Tools instance launched from the
clients closes as well.
on page 1451.
HCM Agent displays.
Brocade Network Advisor SAN User Manual
53-1003154-01