•
•
To view the virtual FCoE ports, complete the following steps:
1. Select Configure > FCoE from the menu bar.
2. Select the Virtual FCoE Ports tab.
3. Select one or more virtual ports from the Ports list.
4. Perform one of the following tasks:
5. Click Close to close the dialog box.
Brocade Network Advisor SAN User Manual
53-1003154-01
There is a dynamic binding between the virtual FCoE port and the physical port or LAG.
There is a static binding between the virtual FCoE port and the physical port or lag and there
are end devices connected to it.
or
Right-click the DCB device and select FCoE.
The FCoE Configuration dialog box displays.
The Virtual FCoE Ports tab displays, as shown in
FIGURE 252
Virtual FCoE Ports dialog box
•
Click Enable to enable a selected virtual FCoE port from the Virtual FCoE Ports tab.
•
Click Disable to disable a selected virtual FCoE port from the Virtual FCoE Ports tab.
•
Click Connected Devices to view a list of FCoE virtual ports and to what they are directly
connected.
Virtual FCoE port configuration
Figure
252.
16
651