Brocade Communications Systems WFT-2D User Manual page 552

12
Firmware management
3. Select one or more switches from the Available Switches table.
4. Click the right arrow to move the switches to the Selected Switches table.
5. (Built-in FTP, SCP, or SFTP server) If you have your FTP, SCP, or SFTP server configured to use
6. (External FTP, SCP, or SFTP server) If you configured an external FTP, SCP, or SFTP server,
500
FIGURE 203
Download tab
The Available Switches table lists the switches that are available for firmware download.
If you select any switches that do not support firmware download, a message displays. Click
OK on the message.
The switches that support firmware download display in the Selected Switches table. The
current version displays in the Current Firmware column.
the built-in FTP, SCP, or SFTP server, select a specific version from the Firmware to Download
column, or use Select Latest to automatically select the latest version. Go to
If you have your FTP server configured to use an external FTP server, the Firmware to Download
column is empty.
choose from one of the following options in the External FTP/SCP/SFTP Server area:
•
Select the FTP server option to download from the external FTP server and configure the
following on the FTP server:
a. Create a user name and password.
b. Select the Shared folders link and set the firmware location as the home directory and
select all check boxes under the Files and Directories attributes. Continue with
step 8.
Brocade Network Advisor SAN User Manual
53-1003154-01
step 7.