Brocade Communications Systems WFT-2D User Manual page 517

1. Click the Authentication tab.
2. Select the Enable Client Mutual Authentication check box, as needed.
3. Select the Enable Indication Mutual Authentication check box, as needed.
4. Click Apply.
5. Click Close to close the SMIA Configuration Tool dialog box.
Brocade Network Advisor SAN User Manual
53-1003154-01
FIGURE 190
Authentication tab
If the check box is checked, CIM client mutual authentication is enabled. If the check box is
clear (default), client mutual authentication is disabled.
If the check box is checked, indication mutual authentication is enabled. If the check box is
clear (default), indication mutual authentication is disabled.
NOTE
Changes on this tab take effect after the next CIMOM server restart.
NOTE
You can only restart the server using the Server Management Console (Start > Programs >
Management_Application_Name 12.X.X > Server Management Console).
SMI Agent Configuration Tool
11
465