Key Vault Type And Vendor - Brocade Communications Systems WFT-2D User Manual

Key vault type and vendor

The key vault type for any KMIP-compliant key vault is shown on the switch as "KMIP" in the
groupcfg output. The key vault vendor or key manager name is displayed under "Server SDK
Version".
Sample groupCfg output for SafeNet KeySecure is provided:
SafeNet
Brocade Network Advisor SAN User Manual
53-1003154-01
switch:root> cryptocfg --show -groupcfg
Encryption Group Name:
Failback mode:
Replication mode:
Heartbeat misses:
Heartbeat timeout:
Key Vault Type:
System Card:
Primary Key Vault:
IP address:
Certificate ID:
Certificate label:
State:
Type:
Secondary Key Vault:
IP address:
Certificate ID:
Certificate label:
State:
Type:
Additional Primary Key Vault Information::
Key Vault/CA Certificate Validity:
Port for Key Vault Connection:
Time of Day on Key Server:
Server SDK Version:
Additional Secondary Key Vault Information:
Key Vault/CA Certificate Validity:
Port for Key Vault Connection:
Time of Day on Key Server:
Server SDK Version:
Encryption Node (Key Vault Client) Information:
Node KAC Certificate Validity:
Time of Day on the Switch:
Client SDK Version:
Client Username:
Client Usergroup:
Connection Timeout:
Response Timeout:
Connection Idle Timeout:
Key Vault configuration and connectivity checks successful, ready for key
operations.
Key Management Interoperability Protocol
CRYPTO_LSWAT
Auto
Disabled
3
2
KMIP
Disabled
10.38.145.10
LKM10_CA
SSKM_10
Connected
KMIP
10.38.145.17
LKM10_CA
SSKM_17
Connected
KMIP
20
Yes
5696
N/A
SafeNet, Inc.
Yes
5696
N/A
SafeNet, Inc.
Yes
2012-12-20 07:33:44
N/A
brcduser
brocade
10 seconds
10 seconds
N/A
711