Disabling Historical Performance Collection; Generating And Saving A Historical Performance Graph - Brocade Communications Systems WFT-2D User Manual

Disabling historical performance collection

Perform the following steps to disable historical performance collection on all fabrics.
1. Select Monitor > Performance > Historical Data Collection.
2. Select Disable All.
Historical performance data collection is disabled for all fabrics in the SAN.

Generating and saving a historical performance graph

The Historical Performance Graph is available through the SAN tab or through the IP tab if you
select SAN devices. If selecting through the IP tab, refer to
display"
To generate a historical performance graph for a device, complete the following steps.
1. Select the device for which you want to generate a performance graph.
2. Select Monitor > Performance > Historical Graph.
Brocade Network Advisor SAN User Manual
53-1003154-01
The Fabric Selector dialog box displays.
on page 1115.
The Historical Performance Graph dialog box displays, as shown in
FIGURE 477
Historical Performance Graph dialog box
SAN historical performance data
"Configuring the performance graph
Figure 477
28
on page 1081.
1081