Brocade Communications Systems WFT-2D User Manual page 633

Importing a boot image into the repository
Boot images are required for adapters that are shipped without a boot image or when it is
necessary to overwrite images on adapters that contain older or corrupted boot image versions.
1. From the Management application menu bar, select Configure > Host > Adapter Software.
2. Click the Boot Image tab.
FIGURE 223
3. From the Boot Image Management dialog box, click the Repository button.
4. Click Import on the Boot Image Repository dialog box.
5. The Import Boot Image dialog box displays.
Brocade Network Advisor SAN User Manual
53-1003154-01
The Boot Image Management dialog box, shown in
Boot Image Management dialog box
The Boot Image Repository dialog box, shown in
FIGURE 224
Boot Image Repository dialog box
Adapter software
Figure 223, displays.
Figure 224, displays.
15
581