Configuring Custom Connections; Deleting A Custom Connection Configuration - Brocade Communications Systems WFT-2D User Manual

8
Grouping on the topology

Configuring custom connections

NOTE
Active zones must be available on the fabric.
To create a display of the connected end devices participating in a single zone or group of zones,
complete the following steps.
1. Select a fabric on the topology and select View > Connected End Devices > Custom.
2. Select the zones you want to include in the connection in the Zones in Fabric list.
3. Select the application to which you want to add the selected zones in the Application list.
4. Click the right arrow button to move the zones to the Selected Zones list.
5. Click Save.
6. Enter a new name in the Application Name field.
7.
8. Click OK on the Connected End Devices - Custom display for Fabric dialog box.

Deleting a custom connection configuration

NOTE
Active zones must be available on the fabric.
To delete a custom connection configuration, complete the following steps.
1. Select a fabric on the topology and select View > Connected End Devices > Custom.
2. Select the configuration you want to delete in the Application list.
3. Click Delete.
4. Click OK on the confirmation message.
5. Click OK on the Connected End Devices - Custom display for Fabric dialog box.
388
The Connected End Devices - Custom display for Fabric dialog box displays with a list of devices
participating in a single zone or a group of zones in the Zones in Fabric list.
The Save Application dialog box displays.
Click OK on the Save Application dialog box.
The saved custom connection configuration displays in the Connected End Devices menu.
The Connected End Devices - Custom display for Fabric dialog box displays.
Brocade Network Advisor SAN User Manual
53-1003154-01