Listing Un-Zoned Members; Removing An Offline Device - Brocade Communications Systems WFT-2D User Manual

3. Select a fabric from the Zoning Scope list.
4. Right-click in the Potential Members list and select List Zone Members.
5. Select Historical Graph or Real-Time Graph from the Performance Graph drop-down list.
6. Click Close to exit the List Zone Members dialog box.

Listing un-zoned members

Use this procedure to identify the device ports in the current fabric that are not part of the active
zone configuration.
You can use this procedure for standard zones as well as LSAN zones.
1. Select Configure > Zoning > Fabric.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select a fabric from the Zoning Scope list.
4. Right-click in the Potential Members list and select List Un-Zone Members.
5. Click Close to exit the Un-Zone Members dialog box.

Removing an offline device

The Management application enables you to remove an offline device from all zones and zone
aliases in the selected zone DB.
1. Select Configure > Zoning > Fabric.
2. Select a fabric from the Zoning Scope list.
3. Select Offline Utility from the Zone DB Operation list.
4. Select the check box for the offline device you want to remove in the Remove column.
Brocade Network Advisor SAN User Manual
53-1003154-01
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
The List Zone Members dialog box displays. If the port is a member of a zone, the fabric name,
the port name, and WWN zone members display.
Historical Graph and Real-Time Graph will be launched for the attached switch ports, for the
selected zone members.
The Zoning dialog box displays.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
The Un-Zone Members dialog box displays. The dialog box shows the fabric name and the
connected device ports that are not part of the active zone configuration.
The Zoning dialog box displays.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
The Offline Device Management dialog box displays.
Select the Remove check box to select all offline devices.
Zoning administration
21
929