Dashboard Integration With Flow Vision - Brocade Communications Systems WFT-2D User Manual

3. Complete the flow definition using one of the following procedures:

Dashboard integration with Flow Vision

You can use the Dashboard to monitor flows.
Monitoring flows from the Dashboard
You can create a flow monitor from a performance graph
graph"
user-defined traffic flow performance monitor"
Figure 525
FIGURE 525
Brocade Network Advisor SAN User Manual
53-1003154-01
TABLE 103
Add Flow Definition dialog box options populated per port connectivity row selection
Row selected
Target
Row other than the first or last row
•
"Creating a Flow Monitor flow definition"
•
"Creating a Flow Generator flow definition"
•
"Creating a Flow Mirror flow definition"
on page 1220") or by creating a user-defined performance monitor
shows a flow performance monitor.
Flow performance monitor
Flow Vision interoperability with other features
Options populated
Target Switch = Selected port's connected switch
Source Device = * if port is on a 16-Gbps switch, otherwise empty
Destination Device = Target port ID
Ingress Port = Selected port's connected switch port number
Direction = Bidirectional
Target Switch = Selected switch
Source Device = * if port is on a 16-Gbps switch, otherwise empty
Destination Device = * if port is on a 16-Gbps switch, otherwise empty
Ingress Port = Selected port number
Direction = Bidirectional
on page 1140"
on page 1181"
on page 1191"
("Monitoring flows using a performance
on page 434").
29
("Configuring a
1219