Brocade Communications Systems WFT-2D User Manual page 1303

Brocade Network Advisor SAN User Manual
53-1003154-01
Switch Checks — Switch checks provide the following information for each selected check:
Name — Product name.

Status — Result of the check and reason for failure if known. Valid results include

Passed, Partially Failed, Failed, Not Applicable, and Unknown.
Switch Checks include the following options:
Switch — Check for at least Configured_Minimum_Value connections to neighboring

switches. This check provides the following additional detail for this check:
-
Neighboring Switch — Name of the neighboring switch.
-
Connection Count — Number of connections to the neighboring switch.
Switch — Check for HTTPS (secure HTTP) configuration. This check provides the

following additional detail for this check:
-
HTTPs Status — Whether HTTPS is enabled or disabled on the product.
-
HTTP Status — Whether HTTP is enabled or disabled on the product.
Switch — Check if the product is configured to send events to this server.

Switch — Check if the product is configured to send Upload Failure Data Capture

information to an FTP server.
Switch - Check for SSH (secure Telnet) configuration. This check provides the following

additional detail for this check:
-
SSH Status — Whether SSH is enabled or disabled on the product.
-
Telnet Status — Whether Telnet is enabled or disabled on the product.
Switch - Check for SNMPv3 (secure SNMP) configuration. This check provides the

following additional detail for this check:
-
SNMPv3 Status — Whether SNMPv3 is enabled or disabled on the product.
-
SNMP Status — Whether SNMP is enabled or disabled on the product.
Switch - Check for MAPS actions enabled (SAN only). This check provides the following

details:
-
RAS Log Event — Whether the RAS log event action is enabled or disabled on the
switch.
-
Port Decommission — Whether the Port Decommission event action is enabled or
disabled on the switch
-
SNMP Trap — Whether the SNMP Trap event action is enabled or disabled on the
switch.
-
Fence — Whether the Fence event action is enabled or disabled on the switch.
-
E-mail — Whether the e-mail event action is enabled or disabled on the switch.
-
SFP Status Marginal — Whether the SFP Status Marginal event action is enabled
or disabled on the switch.
-
Switch Status Marginal — Whether the Switch Status Marginal event action is
enabled or disabled on the switch.
-
Switch Status Critical — Whether the Switch Status Critical event action is enabled
or disabled on the switch.
Configuration Rule Checks — Switch checks provide the following information for each

selected check:
-
Block/Condition Name — Name of the block or condition.
Viewing a configuration policy manager report
31
1251